RAM 1500 Van V8-5.2L CNG VIN T (1999)
Power Window Circuit Breaker: Testing and Inspection
Junction Block
1. Locate the circuit breaker in the junction block. Pull out the circuit breaker slightly, but be certain that the circuit breaker terminals still contact the
terminals in the junction block cavities.
2. Connect the negative lead of a 12-volt DC voltmeter to a good ground.
3. With the voltmeter positive lead, check both terminals of the circuit breaker for battery voltage.
If only one terminal has battery voltage, the circuit breaker is faulty and must be replaced. If neither terminal has battery voltage, repair the open circuit
from the Power Distribution Center (PDC) as required. If the circuit breaker checks OK, but no power windows operate, see Power Window System in
the Diagnosis and Testing.
