RAM 1500 Van V8-5.2L VIN Y (1999)
Glove Compartment: Service and Repair
Glove Box Replacement
GLOVE BOX
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Roll down the glove box from the instrument panel. Refer to Glove Box Roll Down.
Glove Box Remove/Install
3. Remove the three screws that secure the glove box hinge to the instrument panel lower glove box opening reinforcement.
4. Remove the glove box from the instrument panel.
INSTALLATION
1. Position the glove box hinge to the instrument panel lower glove box opening reinforcement.
2. Install and tighten the three screws that secure the glove box hinge to the instrument panel lower glove box opening reinforcement. Tighten the
screws to 3.4 Nm (30 in. lbs.).
3. Roll up the glove box into the instrument panel. Refer to Glove Box Roll Down.
4. Reconnect the battery negative cable.