dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Heater - A/C Housing Removal and Installation|Page 4952 > < Heater - A/C Housing Removal and Installation|Page 4950
Page 1
background image

Housing Assembly HVAC: Service and Repair
Rear Heater-A/C Unit Replacement and Service

REAR HEATER - A/C UNIT

WARNING:  REVIEW THE WARNINGS AND CAUTIONS PERFORMING THE FOLLOWING OPERATION.

REMOVAL

1. Disconnect and isolate the battery negative cable.

2. Disconnect the underbody plumbing at the rear heater-A/C unit plumbing connections. Refer to: "Hose/Line HVAC : Service and Repair : 

Underbody Refrigerant Line Replacement"  See: Hose/Line HVAC/Service and Repair/Underbody Refrigerant Line Replacement

Install plugs in, or tape over all of the opened plumbing fittings.

Rear Heat-A/C Unit Plumbing Plate Remove/Install

3. Remove the three nuts that secure the rear heater-A/C unit plumbing plate studs to the underbody panel.

Rear Heat-A/C Unit Remove/Install

4. Remove the one screw that secures the rear heater-A/C unit to the underbody panel from underneath.

5. Lower the vehicle and remove the cover from the rear heater-A/C unit.  Refer to: "Heating and Air Conditioning : Service and Repair :  Rear

Heater-A/C Cover Replacement" See: Rear Heater-A/C Unit Cover Removal and Installation

6. Remove the vertical duct from the rear heater- A/C unit. Refer to: "Air Duct : Service and Repair : Vertical Duct Replacement"   See: Air

Duct/Service and Repair/Vertical Duct Replacement

Heater - A/C Housing Removal and Installation|Page 4952 > < Heater - A/C Housing Removal and Installation|Page 4950