RAM 1500 Van V8-5.2L VIN Y (1999)
1. Position sending unit into tracks. Note wire routing.
2. Push unit on tracks until lock tab snaps into notch.
3. Connect 2 sending unit wires into 4-way connector and install locking collar.
4. Connect 4-way electrical connector to module.
5. Install fuel pump module. Refer to Fuel Pump Module Removal and Installation.
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair
6. Install fuel tank. Refer to Fuel Tank Removal and Installation.
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair