RAM 1500 Van V8-5.2L VIN Y (1999)
Windshield Washer Switch: Description and Operation
Multi-Function Switch
The windshield wiper and washer switches are integral to the multi-function switch assembly, which is secured to the left side of the steering column.
A knob on the end of the multi-function switch stalk is rotated to select the desired wiper speed or intermittent wipe delay interval. A paddle near the
end of the switch stalk is rotated toward the instrument panel to activate the washer system.
The multi-function switch also contains circuitry for the following functions:
-
Turn signals
-
Hazard warning
-
Headlamp beam selection
-
Headlamp optical horn
-
Horn contact and circuit.
The information contained addresses only the multi-function switch windshield wiper and washer switches. However, the windshield wiper and washer
switches cannot be repaired. If these switches or any other circuit of the multi-function switch is faulty or damaged, the entire multi-function switch
assembly must be replaced. Refer to Turn Signal Switch and Hazard Warning Switch in the Replacement of Turn Signal and Hazard Warning Systems
for the multi-function switch service procedures.