RAM 1500 Van V8-5.9L VIN Z (1998)
Trim Panel: Service and Repair
WINDSHIELD HEADER, A-PILLAR AND FRONT DOOR HEADER TRIM PANELS
REMOVAL
1. Remove the sunvisor and retaining clip screws from the windshield header. Remove the visors and clips from the windshield header.
2. Remove the trim panel screws from the body interior panels.
3. Remove the trim panels from the body interior panels.
INSTALLATION
1. Position the trim panels at the body interior panels.
2. Install the trim panel screws in the body interior panels. Tighten the screws to 2 Nm (17 in. lbs.) torque.
3. Position the sunvisors and retaining clips on the windshield header with the screw holes aligned.
4. Install the screws in the windshield header. Tighten the screws to 2 Nm (17 in. lbs.) torque.