RAM 1500 Van V8-5.9L VIN Z (1998)
6. Remove spool valve from valve body by pulling and rotating the spool valve from the valve body.
7. Remove spool valve O-ring and valve body teflon and O-rings underneath the teflon rings.
8. Remove the O-ring between the worm shaft and the stub shaft.
ASSEMBLY
NOTE: Clean and dry all components, then lubricate with power steering fluid.
1. Install spool valve spool O-ring.
2. Install spool valve in valve body by pushing and rotating. Hole in spool valve for stub shaft pin must be accessible from opposite end of valve
body.