RAM 1500 Van V8-5.9L VIN Z LDC (2001)
10. Install the accessory drive belt.
CAUTION: When installing the serpentine accessory drive belt, the belt must be routed correctly. If not, the engine may overheat due to the
water pump rotating in the wrong direction. Refer to Belt Schematics in the Engine Accessory Drive Belt section of this group for correct belt
routing. The correct belt with the correct length must be used.
11. Install air cleaner assembly and plastic air intake tube.
12. Install fan shroud.
13. Install upper radiator hose to radiator.
14. Connect wiring harness to A/C compressor.
15. Fill cooling system.
16. Start and warm the engine. Check for leaks.
17. Install engine cover.
