RAM 1500 Van V8-5.9L VIN Z LDC (2001)
Fuel Level Sensor: Service and Repair
REMOVAL
Fig. 7 Fuel Gauge Sending Unit Location - Typical Module
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module. The fuel pump module is located inside
of fuel tank.
1. Remove fuel tank. Refer to Fuel Tank Removal/ Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/installation.
3. Unplug 4-way electrical connector.
4. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
