RAM 1500 Van V8-5.9L VIN Z LDC (2001)
Fig. 5 Power Mirror Switch Remove/Install
5. Unplug the power mirror switch wire harness connector.
6. Remove the power mirror switch from the back of the door mirror flag bezel.
INSTALLATION
1. Install the power mirror switch from the back of the door mirror flag bezel.
2. Connect the power mirror switch wire harness connector.
3. Install the mirror flag bezel to the inside of the front door.
4. Install the nut that secures the power mirror switch to the door panel.
5. Install the power mirror control knob.
6. Connect the battery negative cable.
