RAM 1500 Van V8-5.9L VIN Z LDC (2001)
11. Remove teflon ring and O-ring from the rack piston.
12. Remove the adjuster lock nut and adjuster nut from the stub shaft.
13. Pull the stub shaft with the spool valve and thrust support assembly out of the housing.
14. Remove the worm shaft from the housing.
INSTALLATION
NOTE: Clean and dry all components and lubricate with power steering fluid.
1. Check for scores, nicks or burrs on the rack piston finished surface. Slight wear is normal on the worm gear surfaces.
2. Install O-ring and teflon ring on the rack piston.
