RAM 1500 Van V8-5.9L VIN Z LDC (2001)
11. Install front annulus gear over and onto front planetary gear (Fig. 222). Be sure gears are fully meshed and seated.
12. Install front planetary and annulus gear assembly (Fig. 223). Hold gears together and slide them onto shaft. Be sure planetary pinions are seated on
sun gear and that planetary carrier is seated on intermediate shaft.
13. Place geartrain in upright position. Rotate gears to be sure all components are seated and properly assembled. Snap-ring groove at forward end of
intermediate shaft will be completely exposed when components are assembled correctly.