RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
Brake Hose/Line: Testing and Inspection
Brake Hoses
Flexible rubber hose is used at both front brakes and at the rear axle junction block. Inspect the hoses whenever the brake system is serviced, at every
engine oil change, or whenever the vehicle is in for service. Inspect the hoses for surface cracking, scuffing, or worn spots. Replace any brake hose
immediately if the fabric casing of the hose is exposed due to cracks or abrasions. Also check brake hose installation. Faulty installation can result in
kinked, twisted hoses, or contact with the wheels and tires or other chassis components. All of these conditions can lead to scuffing, cracking and
eventual failure. Factory replacement brake lines and hoses are recommended to ensure quality, correct length and superior fatigue life. Care should be
taken to make sure that brake line and hose mating surfaces are clean and free from nicks and burrs. Also remember that right and left brake hoses are
not interchangeable. Use new copper seal washers at all caliper connections. Be sure brake line connections are properly made (not cross threaded) and
tightened to recommended torque.
