RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
12. Tighten the bolts evenly in the sequence shown using the following torque steps.
^
STEP 1-Tighten all bolts in sequence to 60 Nm (44 ft. lbs.) torque.
^
STEP 2-Tighten all bolts in sequence to 119 Nm (88 ft. lbs.) torque.
^
STEP 3- Tighten all bolts in sequence to 176 Nm (129 ft. lbs.) torque.
13. Turn the crankshaft to determine that it will rotate freely all 360 degrees. Check the main bearing cap installations and/or the bearing sizes if the
shaft does not turn easily.
14. Push the crankshaft towards one end of its thrust and place a dial indicator as shown.
15. Zero the indicator needle and push the crankshaft towards the other end of its thrust and record the crankshaft end clearance.
