RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
Without Air Conditioning
CAUTION: When installing serpentine accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating
in wrong direction. Refer to illustration for correct engine belt routing. The correct belt with correct length must be used.
INSTALLATION
1. Position drive belt over all pulleys except water pump pulley.
2. Attach a 3/8 inch ratchet to tensioner.
3. Rotate ratchet and belt tensioner counterclockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be
sure belt is properly seated on all pulleys.
