dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Oil|Capacity Specifications|Page 1161 > < Engine Oil|Capacity Specifications|Page 1159
Page 1
background image

Engine Oil: Testing and Inspection

CAUTION:  Do not overfill crankcase with engine oil, oil foaming and oil pressure loss can result.

NOTE:  To ensure proper lubrication of an engine, the engine oil must be maintained at an acceptable level. The acceptable oil level is in the SAFE
RANGE on the engine oil dipstick.

1. Position vehicle on level surface.
2. With engine OFF, allow approximately ten minutes for oil to settle to bottom of crankcase, remove engine oil dipstick.
3. Wipe dipstick clean.
4. Install dipstick and verify it is seated in the tube.
5. Remove dipstick, with handle held above the tip, take oil level reading.
6. Add oil only if level is below the SAFE RANGE area on the dipstick.
7. Replace dipstick.

Engine Oil|Capacity Specifications|Page 1161 > < Engine Oil|Capacity Specifications|Page 1159