RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
13.
Remove the three cable mounting bracket bolts (Figure 2).
14.
Remove the two throttle lever bolts (Figure 2).
CAUTION:
Do not loosen throttle lever adjustment lock-down screw
15.
Remove the cable mounting bracket, throttle lever and control rod as an assembly (Figure 2).
16.
Support the secondary bellcrank by clamping the rod end in a vise (Figure 3).
17.
Using a flat file, file the opposite side of the secondary bellcrank throttle rod ball stud (peened side) until it is flush with the bellcrank surface
(Figure 3).
