RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
8.
Follow the steps presented on the MDS and DRB III which will allow the DRB III to obtain the current part number of the PCM.
9.
The MDS will display the part number of the PCM on the vehicle and the appropriate replacement part number, then press NEXT MENU to begin
programming.
If the PCM on the vehicle has already been updated or programmed, a NO UPDATES AVAILABLE message will be displayed. Check the part
number of the PCM on the vehicle and compare it to the part number displayed. If the PCM has already been updated, then another condition
exists that will require further diagnosis and repair.
10.
The MDS and DRB III will prompt for any operator action needed during the remainder of the programming process.
NOTE:
THE FOLLOWING STEPS ARE REQUIRED BY LAW.
11.
Type the necessary information on the "Authorized Software Update Label" p/n 04669020. Attach the label to the PCM and cover the label with
the clear plastic overlay.
12.
Type the necessary information on the "Authorized Modification Label" p/n 04275086 and attach the label near the VECI Label.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
08-19-47-99
0.5 Hrs.
FAILURE CODE:
FM - Flash Module
