RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
Fuel Gauge Sender: Testing and Inspection
The fuel gauge sending unit contains a variable resistor (track). As the float moves up or down, electrical resistance will change. To test the gauge
sending unit only, it must be removed from vehicle. The unit is part of the fuel pump module. Refer to Fuel Pump Module Removal Installation for
procedures.
Measure the resistance across the sending unit terminals.
-
With float in up position, resistance should be 8 ohms.
-
With float in down position, resistance should be 102 ohms.
