RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
4. Measure back (counterclockwise) 13 mm (0.50 inch) and mark housing.
5. Rotate adjustment cap back (counterclockwise) with spanner wrench until hole is aligned with the second mark.
6. Install and tighten locknut to 108 Nm (80 ft. lbs.). Be sure adjustment cap does not turn while tightening the locknut.
OVER-CENTER
1. Rotate the stub shaft from stop to stop and count the number of turns.