RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
Wheel Bearing: Service and Repair
Cleaning and Inspection
NOTE: Bearing and races must be replaced as a set if worn or damaged.
1. Thoroughly clean the interior of hub/rotor.
2. Clean the bearings with solvent and towel dry.
3. After cleaning, apply engine oil to each bearing.
4. Rotate each bearing slowly while applying downward force. Examine the rollers for pitting and roughness, replace bearing if worn or defective.
5. Remove the engine oil from each bearing. Pack each bearing with multi-purpose NLGI, grade 2, EP-type lubricant (or an equivalent lubricant).
NOTE: Ensure that lubricant is forced into all the cavities between the bearing cage and rollers.
