RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
CLEANING
1. Using a suitable solvent, clean pan and magnet.
2. Using a suitable gasket scraper, clean gasket material from gasket surface of transmission case and the gasket flange around the pan.
INSTALLATION
1. Place replacement filter in position on valve body.
2. Install screws to hold filter to valve body. Tighten screws to 4 Nm (35 inch lbs.) torque.
3. Place new gasket in position on pan and install pan on transmission.
4. Place pan in position on transmission.
5. Install screws to hold pan to transmission. Tighten bolts to 17 Nm (150 inch lbs.) torque.
6. Lower vehicle and fill transmission with MOPAR ATF+4, type 9602 fluid, or equivalent.
