RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
5. If clutch cover will be reused, mark position of cover on flywheel with paint or scriber.
6. Insert clutch alignment tool in clutch disc and into pilot bushing. Tool will hold disc in place when cover bolts are removed.
7. If clutch cover will be reused, loosen cover bolts evenly, only few threads at a time, and in a diagonal pattern. This relieves cover spring tension
evenly to avoid warping.
8. Remove cover bolts completely and remove cover, disc and alignment tool.
INSTALLATION
1. Check runout and free operation of new clutch disc.
2. Lubricate crankshaft pilot bearing with MOPAR high temperature bearing grease.
3. Insert clutch alignment tool in clutch disc hub.
