RAM 2500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1997)
Wiper Motor: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the wiper arms.
Cowl Plenum Cover/Grille Panel Weatherstrip
3. Remove the weatherstrip along the front edge of cowl plenum cover/grille panel.
Plastic Screws Remove/Install
4. Release the plastic screws that secure the cowl plenum cover/grille panel to the cowl top panel.
5. Lift the cowl plenum cover/grille panel from the vehicle far enough to access the windshield washer plumbing.
Washer Hoses Remove/Install
6. Disconnect the washer nozzle hoses from the supply hose at the Y fitting.
7. Remove the cowl plenum cover/grille panel from the vehicle and set it aside.
