RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
6. Remove the cowl trim panel See: Cowl Trim/Cowl Trim - Removal .
7. Remove the rear door sill trim cover See: Scuff Plate/Service and Repair/Removal .
8. Remove the upper B-pillar trim panel See: Pillar Trim/B-Pillar Trim .
9. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower B-pillar trim panel (1) to the B-pillar (2).
10. Remove the seat belt (3) from the lower B-pillar trim panel through the slot provided and remove the trim panel.
Installation
INSTALLATION
REGULAR CAB
1. Route the seat belt (1) through the slot in the lower B-pillar trim panel (3) and position the trim panel to the B-pillar (4).
2. Engage the retaining tabs that secure the lower B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt to the bottom of the B-pillar. Tighten the bolt to 40 Nm (30 ft. lbs.).
4. Install the upper B-pillar trim panel See: Pillar Trim/B-Pillar Trim .
5. Install the cowl trim panel See: Cowl Trim/Cowl Trim - Installation .
QUAD CAB