RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Brake Rotor/Disc: Removal and Replacement
Rear
REAR
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper (3), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Removal .
4. Remove the caliper adapter (2) bolts. See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter - Removal
5. Remove the retaining clips and rotor assembly (1).
Front - LD
FRONT - LD
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the caliper (1) with the adaptor bolts (5) from the steering knuckle (4), See: Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper - Removal and remove caliper adapter assembly (1).
NOTE: Do not allow brake hose to support caliper adapter assembly (1).
4. Remove the rotor (2) from the hub/bearing (3).
Front - HD
FRONT - HD
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
NOTE: Do not allow brake hose to support caliper adapter assembly.