RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Brake Hose/Line: Removal and Replacement
Front Brake Hose - Heavy Duty (HD)
FRONT BRAKE HOSE - HEAVY DUTY (HD)
1. Raise and support vehicle.
2. Remove the brake hose (5) from the brake line (1) located at the frame.
3. Remove the brake hose banjo bolt (4) at the caliper.
4. Remove the mounting bolt securing the brake hose (2) to the axle and remove the wheel speed sensor wire (3) from the brake hose (5).
5. Remove the hose (5).
Rear Tube / Hose Assembly
REAR TUBE / HOSE ASSEMBLY
1. Raise and support the vehicle.
2. Remove the brake line located at the axle.
3. Remove the mounting bolt (2) for the brake hose (3) at the axle.
4. Remove the banjo bolt (1) at the caliper.
5. Remove the hose.
Front Brake Hose
FRONT BRAKE HOSE