RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
CAUTION: Locking constant tension clamps will SNAP when released.
NOTE: Locking constant tension clamps can be released using a suitable screwdriver.
16. Position locking constant tension clamp (1) on froward coolant tube (4) and install tube.
17. Using a suitable screwdriver (3), release constant tension clamp (1).
18. Position locking constant tension clamp on rear coolant tube and install tube.
19. Using a suitable screwdriver, release constant tension clamp
20. Position locking constant tension clamp on breather tube and install tube.
21. Using a suitable screwdriver, release constant tension clamp.
22. Fill coolant system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair .
23. Install engine cover.
24. Connect negative battery cable(s).
25. Start engine and check for coolant or exhaust leaks.
Cab Chassis
INSTALLATION - CAB CHASSIS
EGR COOLER - 6.7L DIESEL - CAB-CHASSIS
