RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Wastegate Actuator: Service and Repair
Removal
REMOVAL
1. Disconnect the battery negative cables.
2. Raise vehicle on hoist.
3. Drain cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair .
4. Remove air filter housing See: Air Cleaner Housing/Service and Repair/Air Cleaner Housing - Removal .
5. Disconnect turbocharger actuator electrical connector (1).
6. Remove turbocharger actuator mounting bolts (3).
7. Remove turbocharger actuator (2).
8. Clean mounting surface.