RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Front Steering Knuckle: Service and Repair
Front Steering Knuckle - Removal
(LD) 4X2 & 4X4 - Independent Front Suspension
(LD) 4X2 & 4X4
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, rotor See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal, shield and ABS wheel speed sensor if equipped See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Front Wheel Speed Sensor - Removal .
4. Remove the tie rod end nut. Separate the tie rod from the knuckle with Remover 9360.
5. Remove the halfshaft nut (4X4 only).
6. Remove the upper ball joint nut. Separate the ball joint (4) from the knuckle (6) with Remover 9360 (5)