RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Valve, Valve Spring And Collet Installation
4. Compress the valve spring after installing the spring and retainer.
5. Install new valve collets and release the spring tension.
WARNING: Wear protective equipment and do not stand in line with the valve stem when tapping the valves.
6. Tap the ends of the valve stems with a mallet to verify the collets are seated.
7. Install the cylinder head (Refer to Cylinder Head Removal and Installation).
8. Check the valve clearance adjustment.
