RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Fabricated Wire Pointer
1. Temporarily install the vibration damper and a fabricated wire pointer. Put a flat washer between the pointer and gear housing to prevent damage
to the gear housing.
Fabricated Steel Plate
2. Fabricate a steel plate.
Fabricated Plate Location On No.1 Cylinder
3. Use two flywheel housing bolts to assemble the plate over No.1 cylinder.
4. Rotate the crankshaft in the direction of rotation until the piston contacts the plate.
