Exhaust Manifold Issues: Leaks & Loose Bolts (TSB 09-002-01)
5.
Repeating step 4, install a retention strap to cylinder one and two lower exhaust bolts, and to the upper and lower exhaust bolts for cylinder five
and six (Fig. 2).
6.
Install the cab heater return hose to the exhaust manifold bolt stud. Tighten the nut to 24 Nm (18 ft. lbs.).
7.
Install the remote air cleaner assembly and turbo air inlet duct.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
