RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Fuel Supply Line: Description and Operation
LOW-PRESSURE FUEL LINES
All fuel lines up to the fuel injection pump are considered low-pressure. This includes the fuel lines from: the fuel tank to the fuel transfer pump,
and the fuel transfer pump to the fuel injection pump. The fuel return lines, the fuel drain manifold and the fuel drain manifold lines are also
considered low-pressure lines. High-pressure lines are used between the fuel injection pump and the fuel injectors. Also refer to High-Pressure
Fuel Lines Description/Operation.
HIGH-PRESSURE FUEL LINES
High Pressure Fuel Lines
The high-pressure fuel lines are the 6 lines located between the fuel injection pump and the fuel injector connector tubes. All other fuel lines are
considered low-pressure lines.
CAUTION: The high-pressure fuel lines must be held securely in place in their holders. The lines cannot contact each other or other components.
Do not attempt to weld high-pressure fuel lines or to repair lines that are damaged. If lines are ever kinked or bent, they must be replaced. Use only
the recommended lines when replacement of high-pressure fuel line is necessary.
High-pressure fuel lines deliver fuel under pressure of up to approximately 120,000 kPa (17,405 PSI) from the injection pump to the fuel
injectors. The lines expand and contract from the high-pressure fuel pulses generated during the injection process. All high-pressure fuel lines are
of the same length and inside diameter. Correct high-pressure fuel line usage and installation is critical to smooth engine operation.
WARNING: USE EXTREME CAUTION WHEN INSPECTING FOR HIGH-PRESSURE FUEL LEAKS. INSPECT FOR
HIGH-PRESSURE FUEL LEAKS WITH A SHEET OF CARDBOARD. HIGH FUEL INJECTION PRESSURE CAN CAUSE
PERSONAL INJURY IF CONTACT IS MADE WITH THE SKIN.
