RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Blower Motor Relay: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
Power Distribution Center
2. Remove the cover from the Power Distribution Center (PDC).
3. Refer to the label on the PDC for blower motor relay identification and location.
4. Unplug the blower motor relay from the PDC.
5. Install the blower motor relay by aligning the relay terminals with the cavities in the PDC and pushing the relay firmly into place.
6. Install the PDC cover.
7. Connect the battery negative cable.
8. Test the relay operation.
