RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Ignition Off Draw (IOD) Fuse: Description and Operation
Ignition-Off Draw Fuse
SYSTEM OPERATION
All vehicles are equipped with an Ignition-Off Draw (IOD.) fuse that is removed when the vehicle is shipped from the factory This fuse feeds
various accessories that require battery current when the ignition switch is in the Off position, including the clock. The fuse is removed to prevent
battery discharge during vehicle storage.
When removing or installing the IOD. fuse, it is important that the ignition switch be in the Off position. Failure to place the ignition switch in the
Off position can cause the radio display to become scrambled when the IOD. fuse is removed and replaced. Removing and replacing the IOD. fuse
again, with the ignition switch in the Off position, will correct the scrambled display condition.
The IOD. fuse should be checked if the radio or clock displays are inoperative. The IOD. fuse is located in the junction block. Refer to the label on
the back of the junction block fuse access panel for IOD. fuse identification and location.
