RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
6. Remove hardware that secures the starter motor to the bell housing.
7. Remove the starter motor from the bell housing.
8. Reverse the removal procedures to install. Tighten the starter hardware as follows:
-
Starter mounting bolts - 43 N.m (32 ft. lbs.)
-
Solenoid wire harness terminal nut - 6 N.m (55 in. lbs.)
-
Battery cable terminal nut - 14 N.m (120 in. lbs.).
