RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Control Arm: Service and Repair
Lower Control Arm
REMOVAL
1. Raise and support vehicle.
2. Follow procedure under Coil Spring Removal.
3. Remove bolts mounting suspension arm to crossmember and remove arm.
INSTALLATION
1. Position suspension arm on crossmember and install bolts and nuts snug.
2. Follow procedure under Coil Spring Installation.
3. Remove support and lower vehicle.
4. Tighten suspension arm crossmember nuts to 196 Nm (145 ft. lbs.).
