RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 6 (1998)
Wiper Motor: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the wiper arms from the wiper pivots. See Wiper Arm in the Replacement for the procedures.
Cowl Plenum Cover/Grille Panel Weatherstrip
3. Remove the weather-strip along the front edge of the cowl plenum cover/grille panel and the cowl plenum panel.
Cowl Plenum Plastic Screws Remove/Install
4. Remove the plastic screws that secure the cowl plenum cover/grille panel to the studs on the cowl top panel near the base of the windshield.
5. Lift the cowl plenum cover/grille panel from the cowl top far enough to access the windshield washer nozzle plumbing near the left end of the
cowl plenum.
Washer Hoses Remove/Install
6. Disconnect the windshield washer supply hose at the Y fitting.