RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Skid Plate: Service and Repair
FRONT SKID PLATE
REMOVAL
1. Raise and support the vehicle.
Fig. 31
2. Remove the bolts. (Fig. 31)
3. Slide skid plate back off of the crossmember and remove.
INSTALLATION
1. Snap the rear tabs over the front crossmember and install the skid plate.
2. Install the bolts and tighten to 34 N.m (25 ft.lbs).
