RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Fig.11 Clutch Field Coil Snap Ring Remove
10. Remove the snap ring from the compressor hub and remove the clutch field coil. Slide the clutch field coil off of the compressor hub.
INSTALLATION
1. Install the clutch field coil and snap ring.
2. Install the clutch coil lead wire harness retaining clip on the compressor front housing and tighten the retaining screw.
3. Align the rotor assembly squarely on the front compressor housing hub.
Fig.12 Rotor Installer Set
4. Thread the handle (Special Tool 6464 in Kit 6460) into the driver (Special Tool 6143 in Kit 6460).
