dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6849 > < Diagram Information and Instructions|Page 6847
Page 2
background image

Fig.2 Central Timer Module (High-Line/Premium)

BODY CONTROL/CENTRAL TIMER MODULE

Three versions of the Central Timer Module (CTM) are available on this vehicle, a base version (Fig. 1), a high-line version (Fig. 2), and a
premium version. Whichever version of the CTM the vehicle is equipped with, it is concealed under the driver side end of the instrument panel
inboard of the instrument panel steering column opening, where it is secured with two screws to a stamped steel bracket that is integral to the
instrument panel armature. The CTM is enclosed in a molded plastic housing with one (base) or two (high-line/premium) integral external
connector receptacles that connect it to the vehicle electrical system through one (base) or two (high-line/premium) take outs with connectors from
the instrument panel wire harness.

The base version of the CTM is used on base models of this vehicle. It is also sometimes referred to as the Integrated Electronic Module (IEM).
The base version of the CTM combines the functions of a chime module and an intermittent wipe module in a single unit. The high-line version of
the CTM is used on high-line vehicles. The high-line CTM provides all of the functions of the base version of the CTM, but also is used to control
and integrate many additional electronic functions and features included on high- line models. The premium version of the CTM is the same as the
high-line version, but is used only on models equipped with the heated seat option.

The high-line and premium versions of the CTM utilize integrated circuitry and information carried on the Chrysler Collision Detection (CCD)
data bus network along with many hard wired inputs to monitor many sensor and switch inputs throughout the vehicle. In response to those inputs,
the internal circuitry and programming of the CTM allow it to control and integrate many electronic functions and features of the vehicle through
both hard wired outputs and the transmission of electronic message outputs to other electronic modules in the vehicle over the CCD data bus.

The features that the CTM supports or controls include the following:
-

Automatic Door Lock - The high-line/premium CTM provides an optional automatic door lock feature (also known as rolling door locks). This
is a programmable feature.

-

Central Locking - The high-line/premium CTM provides an optional central locking/unlocking feature.

-

Chimes - All versions of the CTM provide chime service through an integral chime tone generator.

-

Courtesy Lamps - The high-line/premium CTM provides courtesy lamp control with timed load shedding.

-

Door Lock Inhibit - The high-line/premium CTM provides a door lock inhibit feature.

-

Enhanced Accident Response - The high-line/premium CTM provides an optional enhanced accident response feature. This is a programmable
feature.

-

Heated Seats - The premium CTM controls the optional heated seat system by controlling the operation of the heated seat relay.

-

Illuminated Entry - The high-line/premium CTM provides a timed illuminated entry feature.

-

Intermittent Wipe Control - All versions of the CTM provide control of the intermittent wipe delay, and wipe-after-wash features.

-

Panic Mode - The high-line/premium CTM provides support for the optional RKE system panic mode features.

-

Power Lock Control - The high-line/premium CTM provides the optional power lock system features, including support for the automatic door
lock and door lock inhibit modes.

-

Programmable Features - The high-line/premium CTM provides support for certain programmable features.

-

Remote Keyless Entry - The high-line/premium CTM provides the optional Remote Keyless Entry (RKE) system features, including support
for the RKE Lock (with optional horn chirp), Unlock, Panic, and illuminated entry modes, as well as the ability to be programmed to recognize
up to four RKE transmitters. The RKE horn chirp is a programmable feature,

-

Remote Radio Switch Interface - The high- line/premium CTM monitors and transmits the status of the optional remote radio switches.

-

Speed Sensitive Intermittent Wipe Control - The high-line/premium CTM provides the speed sensitive intermittent wipe feature.

Diagram Information and Instructions|Page 6849 > < Diagram Information and Instructions|Page 6847