RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
REMOVAL
Fig. 34 MAP Sensor Location
The MAP sensor is located in the left/rear side of the intake manifold.
1. Disconnect electrical connector from MAP sensor.
Fig. 35 MAP Sensor Removal/Installation
2. Remove MAP sensor from intake manifold.
3. Discard sensor O-ring.
INSTALLATION
The MAP sensor is located in the left/rear side of the intake manifold.
