dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Air Bleeding Procedure|Page 2123 > < Air Bleeding Procedure|Page 2121
Page 2
background image

Fig. 6 Fuel Filter/Water Separator Components

b. Remove O-ring (Fig. 6) from filter cap and discard.
c. The filter is retained to the cap with a series of locking fingers. Carefully pry back a few of the fingers to unlock filter from cap.

6. Water-In-Fuel (WIF) Sensor Replacement: The WIF sensor is located on the side of the fuel filter housing (Fig. 6).

Air Bleeding Procedure|Page 2123 > < Air Bleeding Procedure|Page 2121