RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Power Steering Pump: Service and Repair
Removal and Installation
REMOVAL - DIESEL ENGINE
1. Remove and cap steering pump hoses and vacuum pump vacuum line.
2. Remove the sender unit from engine block and plug hole in block.
3. Remove the serpentine belt.
4. Remove and cap the oil feed line from the bottom of the vacuum pump.
5. Remove the lower bolt that attaches the vacuum/steering pump assembly to the engine block. Remove the nut from the steering pump attaching
bracket.
