RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
2.
Visually inspect the right and left auxiliary leaf spring. If the auxiliary spring has two leaves, no further action is required (Figure 1). If the
auxiliary spring has a single leaf, continue to Step 3.
3.
Inspect the right and left rear springs for the presence of a metal spacer between the spring seat and the auxiliary spring (Figure 2).
4.
If spring spacers are not present, no further action is required. If spacers are found, continue with Section B. Replace Rear Spring Seat.
B.
Replace Rear Spring Seats
1.
Remove the rear wheel and tire assemblies.
2.
Place an identification mark on the front of the auxiliary spring to ensure proper orientation during reassembly.
3.
Support the left side of the rear axle with an appropriate jackstand.
4.
Remove the four spring clamp bolt (u-bolt) nuts.
5.
Remove the spring plate, spring clamp bolts and the spring seat. Discard the original spring seat.
6.
Remove the auxiliary spring from the main spring assembly.
