RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Clutch: Service and Repair
Front Clutch
DISASSEMBLY
1. Remove the waved snap-ring, reaction plate, clutch plates, and clutch discs.
2. Compress clutch piston retainer and piston springs with Compressor Tool C-3863-A (Fig. 88).
3. Remove retainer snap-ring and remove compressor tool.
4. Remove clutch piston springs (Fig. 89). Note position of piston springs for assembly reference.
5. Remove clutch piston from retainer with a twisting motion.
6. Remove and discard clutch piston inner and outer seals.