RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
14. Install clutch plates and discs (Fig. 95). Four clutch discs, four steel plates and one reaction plate are required.
15. Install reaction plate followed by waved snapring.
16. Check clutch pack clearance with feeler gauge (Fig. 93). Clearance between waved spring and pressure plate should 1.78 - 3.28 mm (0.070 - 0.129
inch). If clearance is incorrect, clutch plates, clutch discs, snap-ring, or pressure plate may have to be changed.
