RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
1. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion rear bearing cup with Installer C-4204 and Handle
C-4171 (Fig. 50) and verify cup is seated.
2. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion front bearing cup with Installer C-4308 and Handle
C-4171 (Fig. 51) and verify cup is seated.
3. Install pinion front bearing and oil slinger, if equipped. Apply a light coating of gear lubricant on the lip of pinion seal.