RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
21. Install new ring gear bolts and alternately tighten to 156 Nm (115 ft. lbs.) (Fig. 59).
CAUTION: Do not reuse the bolts that held the ring gear to the differential case. The bolts can fracture causing extensive damage.
22. Install differential in axle housing and verify gear mesh and contact pattern.
23. Install axle shafts.
24. Install wheel and tire assemblies.
25. Install differential cover and fill with gear lubricant.
26. Install propeller shaft with reference marks aligned.
27. Remove support and lower vehicle.